Product

Liquid-based slurry is three-dimensional centrifugal slurry pump. None of these pump seal structure, without any increase in seal water use should be part of the pump and stent immersed below the liquid level work. This pump is usually installed in the pit Ikegami use, both can be fixed on the beam in the pit pool can also be hanging with. Liquid metal pump can also pump at the bottom of the inlet pipe installation progress, in order to sink to the Bottom of pumping high concentrations of slurry. Metal pump for conveying a strong abrasive slurry. Pumps can be transported without sharp corners of the fine particles, high concentration slurry, can transport corrosive slurry. Submerged pump Direct drive transmission mode has two kinds of drive and V-belt drive, which will help meet user requirements in different operating point.

Liquid pump according to the performance of different materials vary as follows

Metal type submerged pump：

Caliber：40－300mm

Flow：17—1267m³/h

Head：4—40m

Rubber type submerged pump：

Caliber：40—150 mm

Flow：17—500 m³/h

Head：4—35 m

此页面上的内容需要较新版本的 Adobe Flash Player。